The EA 1 is intentional for the sake of the TLM 103, TLM 193 and M 147 Tube microphones. It has a turning link mount in the estimation of a 5/8"-27 distaff yarn that put up be fastened to tripods. Included is a threaded adaptor to link up to 1/2"- and 3/8" studs.

Blue's substantial memorial tablet Series Two Shockmount is separately hand-built and soldered. Crafted in the opinion of the like attending to item that goes into quite Blue mics, this shockmount testament utmost a lifetime.

A 24-volt optical condenser mic testament go alto gether on 48 volts. In occurrence, mics rated at as small as 9 volts put up repeatedly run on 48 volts, nevertheless you should check out in contrast with the producer 1st. Conversely, a mic testament in general execute c. h. best goaded by non to a lesser extent than its rated emf so, as far as concerns a 48-volt mic, you would become prevalent c. h. best results in contrast with 48 volts of phantom power. The Phantom III is a outstanding quality towards these necessarily.

Shock Stopper turning link isolation mount reduces transmission system of mechanically skillful disturbance and vibe by more than that 20 dB.This Shock Mount is intentional with respect to SM57, SM58, SM86, Beta 57A, Beta 58A, Beta 87C or whatsoever Shure narrowing palm mic.For a consummate compatibility lean delight bear on to the archetype manufacturer's net land site.

For powering phantom powered microphones through one and the other 12VDC or 48VDC. Since the units habituate a 100KHz switching power provide in that respect is no sound disturbance generated. They feature production draw downward resistors so they testament act according to whatever mixer and feature 2DC jackstones so sundry units tin habituate unitary adapter. Phantom emf: 12V or 48V selectableJacks: Male and Female XLR 2: 5mm DC input jacksControl: 12/48 v selector switch switchPower Input 14 - 18 VCD (included)Size: PB223: 6" x 2.5" x 1.25"Weight: PB223 - 1.5 lbs. (.68 Kg)

Designed to be used immediately after the MXL V67, MXL V69, MXL 1006 & MXL 1006BP.

Microphone Shock Mount

Shockmount during the SCM 900/910/920/1000 & TCM 1000 workshop mics.

SM-1 Shock put on since Rode NT-1 and NT-2 microphones

The ultracompact Behringer MICROPOWER phantom power supply stores +12V or +48V phantom power to whatever typewrite of optical condenser mike and routes the mike sign to a mixer or a mike preamplifier. The PS400 gives you low-noise sound public presentation in a thick packet.